💥FREE SHIPPING within the US on orders of $50 or more.


    Your Cart is Empty


    RubiGrid® 2013-2018 RAM Truck & 2019+ RAM 1500 Classic Phone Holder Multi-Device Dash Mount


    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Universal Phone Holder
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (1x) Universal Phone Holder
    (1x) Tablet Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-compatible Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-compatible Wireless Phone Charger
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Wireless Charger with Motorized Cradle Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) DiabloM6 Magnetic Phone Holder
    (2x) Metal Plates with Adhesive for phone
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball

    ✅ 2013-2018 RAM 1500, 2500, 3500, 4500, 5500
    ✅ 2019+ RAM 1500 Classic
    ❌ Does NOT fit 2019+ RAM 1500, 2500, 3500, 4500, 5500 & TRX

    RubiGrid® RAM Truck Phone Mount & Multi-Device Dash Platform

    Built and designed specifically for the 2013-2018 RAM Truck & 2019+ RAM 1500 Classic, our rock solid dash mount installs securely into the dash of your truck and provides a solid and reliable mounting point for your devices.



    This RubiGrid® dash mount is built specifically for your 2013-2018 RAM Truck 1500, 2500, 3500, 4500, 5500 as well as the 2019+ RAM 1500 Classic pick-up for an OEM-like fit.


    RubiGrid® is a fully modular dash mounting platform that uses AMPS balls, mounting arms and device holders to secure all of your devices.

    Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.


    Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.

    RubiGrid® for RAM is fully expandable to use up to 3 AMPS-Style balls so you can securely mount up to 3 different devices on the same dash mount.

    We sell AMPS Mounting Balls separately but you may also choose to secure 3rd party AMPS-compatible mounts here as well. 


    A rock solid mounting system starts with a rigid mounting base. Our RubiGrid® bases are made from precision laser cut metal which results in a solid foundation and an OEM-like fit.


    The Strong Carbon Fiber and Kevlar Arm resists bending and helps keep your device securely in place.

    Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.


    Our RubiGrid® base uses the OEM fastener locations that are already in your dash which means installation only takes a few minutes.

    1. Install the AMPS Ball mounts on your RubiGrid®
    2. Remove the rubber pad along with the OE screws from your dash
    3. Set the RubiGrid® in place lining up with the existing holes and secure with the same OE screws

      That's it! From here, mount your equipment to create your ultimate setup.


      Depending on your needs, we offer a variety of phone holder options including spring-loaded, magnetic, MagSafe-compatible and wireless chargers.

      Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.


      Customer Reviews

      Based on 35 reviews
      Solid, not messing around

      2016 RAM 5500 and used to be full time RV'er 7yrs but Ms Garmin was not updated and an ole Geezer here so hard to see. Needed a tablet. Tried the cup holder thing, too jiggly and kept getting in the way. l
      Saw the Bullet, checked it out, got it and whoa. Solid, firm connection and very happy as it's not in the way and easy to install (note to self, read the Darn install sheet first, hehehe, not after)... very happy with it and highly recommend it. Firm stand/holding,
      Nice... for a change.

      Cory E
      Fit like a glove.

      The mount fit perfect, it is more solid then I was expecting. This is a good design and well manufactured.

      Awesome little mount

      Simple straight forward instructions all tools are included took about 10 minutes or so. Very sturdy mount. Would purchase again.

      Matthew Hufford

      I’ve tried many phone mounts and they have all failed on me in one way or another. That is not the case with this phone mount. It is by far the most durable and sturdy phone mount I’ve seen. I fully expect it to outlast my truck.

      JAMES H

      Very easy to install
      Very solid
      Amazing build quality

      Product FAQs

      If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

      If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

      We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

      Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).

      Please note that this also prevents Wireless Charging.

      If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.

      The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

      If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.