0

    Your Cart is Empty

    RubiGrid® 2019+ Mercedes-Benz Sprinter Van Dash Mount Phone + Device Holder

    BMS-MBSpG3RubiGridUni

    WHAT'S INCLUDED?
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 4cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Universal Phone Holder
    (1x) RubiGrid® Dash Mount
    (2x) 4-Hole AMPS Balls
    (2x) 4cm Carbon Fiber + Kevlar Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Dash Mount
    (2x) 4-Hole AMPS Balls
    (2x) 4cm Carbon Fiber + Kevlar Mounting Arms
    (1x) Universal Phone Holder
    (1x) Tablet Holder
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 4cm Carbon Fiber + Kevlar Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 4cm Carbon Fiber + Kevlar Mounting Arm
    (1x) DiabloM6 Magnetic Phone Holder
    (4x) Metal Plates with adhesive for phones
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 4cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-compatible Phone Holder
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 4cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-compatible Wireless Phone Charger
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 4cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Wireless Phone Charger with Motorized Cradle
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    VEHICLE FITMENT

    ✅ 2019-2025 Mercedes-Benz Sprinter Van

    Customize your Sprinter Van's Command Center with RubiGrid®

    If you're looking to securely mount multiple devices exactly where you want them in your 2019+ Mercedes Sprinter Van, RubiGrid® is the solution you've been looking for.

    RubiGrid® for the Sprinter Van is the ultimate interior accessory allowing you to securely mount all of your necessary devices while freeing up valuable space in your van. No blocking of air vents and no obstructing your view.

    It's time to embark on memorable adVANtures with an organized command center.

    **PATENT PENDING**

    WHAT IS RUBIGRID®?

    RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.

    Mount multiple devices along the all-metal mount and easily change the configuration and location of your mounting balls to dial in your perfect setup. Customize your ultimate adventure-ready command center.

    MORE THAN JUST A SPRINTER VAN PHONE MOUNT

    Our Sprinter Van mount was designed to hold much more than just your phone. Whether you need to mount phones, tablets, action cameras, GPS units, backup cameras, TPMS monitors or radios, RubiGrid® can handle it.

    Since our RubiGrid® dash mount is AMPS-compatible, that means our mount is compatible with 3rd party manufacturers that use AMPS standard specifications.

    OEM-LIKE FITMENT

    Our RubiGrid® dash mount was designed specifically for the 2019+ Mercedes Sprinter Van and has the look and feel of a factory-installed option. It follows the lines of the radio bezel surrounding the head unit for a clean, OEM-like look.

    Your Sprinter Van deserves this level of quality and attention to detail.

    ROCK SOLID INSTALLATION

    Installation requires the removal of the radio bezel along with drilling 6 small holes in order to securely mount our RubiGrid® dash mount to your vehicle using nuts & bolts. All necessary hardware is included.

    Our easy-to-follow instructions make installation a breeze and the end result is a rock solid mounting point for your devices that you can depend on.

    Equip your Sprinter Van with the ultimate dash mount and hit the road with confidence.

    Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder. We recommend using 4-Hole AMPS balls and 4cm mounting arms.

    Customer Reviews

    Based on 19 reviews
    63%
    (12)
    11%
    (2)
    11%
    (2)
    0%
    (0)
    16%
    (3)
    D
    Diablocat
    LOVE THE RUBIGRID!!

    My brother and I installed the RUBIGRID on our Storyteller vans. The platform is solid and well made. I have my phone, radar detector, Wolfbox mirror and iPad mounted on it. We just completed a 5800 mile adventure and had no issues. No creaks, loosening or instability.

    I think the issues mentioned by reviewers stem from install errors. Install WAS difficult due to access. We needed to remove more of the dash components than instructed to get some of the screws in. I reversed one of the top screws (upside down).

    The RUBIGRID is solidly made. For the price, we think it’s the best product out there for your Sprinter dash.

    M
    Mike
    Terrible Design and Atrocious Instructions

    I would HIGHLY recommend looking at alternative products!!! You very well may regret trying to install this in your Mercedes…..so NOT worth it….TERRIBLE DESIGN AND GARBAGE INSTRUCTIONS!!

    Thank you for your feedback. I’m truly sorry to hear that your experience wasn’t a positive one. I have been speaking with you via email and as we have both determined this mount 100% will work with the Sprinters with the larger screens. We have several fleet customers successfully using these mounts with the larger screens as well as several reviews that have demonstrated they work perfectly. Without more specific details about what went wrong or how we may have better assisted you, it’s difficult to fully understand the issue.
    That said, I have forwarded your comments and email correspondence to our R&D team for review. Based on our current information, the mount is indeed compatible with your vehicle. Because of this, we believe the review may be inaccurate, and this response is to clarify for future customers.
    If you’re open to further troubleshooting or would like to provide more information, we’d be more than happy to help resolve any remaining concerns.

    F
    FiL
    Strong, sturdy BUT

    The dash mount in our van looks great, except there are squeaky noises when we drive. Additionally, the Diablo M6 phone mount is not perfectly centered. Other than these minor issues, it’s a good-looking dash mount that appears seamless.

    A
    Adam Hays
    Very solid!

    The mounts look great in our vans, and our technicians are very pleased with them! The only challenge we’ve encountered is that removing the face of the radio for installation is quite difficult—it feels like the plastic might break during the process. Other than that, we’re very satisfied and definitely plan to move forward with adding more of these to our fleet.

    D
    David Learned
    Sprinter

    Better than Ram mounts by far. Way more secure connection and less vibration.

    Product FAQs

    If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

    If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

    We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

    Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).

    Please note that this also prevents Wireless Charging.

    If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.

    The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

    If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.