💥FREE SHIPPING within the US on orders of $50 or more.

    0

    Your Cart is Empty

    RubiGrid® Universal Dash Mount Phone + Device Holder with 3-Ball Capacity

    BMS-3BallUniRubiGridUni

    WHAT'S INCLUDED?
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Universal Phone Holder
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (1x) Universal Phone Holder
    (1x) Tablet Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-Compatible Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-Compatible Wireless Phone Charger
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Wireless Phone Charger with Motorized Cradle
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) DiabloM6 Magnetic Phone Holder
    (2x) Magnetic Plates with Adhesive for phone
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    VEHICLE FITMENT

    ✅ Universal Fitment
    ✅ 1997-2006 Jeep Wrangler TJ
    ✅ 2004-2008 Ford F-150
    ✅ 2008-2016 Ford F-250 and F-350 Super Duty (excluding 2013-2016 Lariat, King Ranch and Platinum with pop-up storage compartment)
    ✅ 2007-2017 Ford Expedition
    ✅ 2014-2021 Toyota Tundra
    ✅ 2014-2021 RAM ProMaster


    3-Ball Universal RubiGrid® Dash Mounts

    Part of our Universal RubiGrid® lineup, this dash mount is capable of supporting up to 3 AMPS Balls.

    This RubiGrid® dash mount measures 6 & 13/16" wide by 2 & 7/16" deep by 11/16" high.

    **PATENT PENDING**

    WHAT IS RUBIGRID®?

    RubiGrid® is a fully modular dash mounting platform that uses AMPS balls, mounting arms and device holders to secure all of your devices.

    Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.


    MORE THAN A PHONE HOLDER

    Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.

    We sell AMPS Mounting Balls separately but you may also choose to secure a 3rd party AMPS-compatible mount here as well.

     

    METAL SERIES

    A rock solid mounting system starts with a rigid mounting base. Our RubiGrid® bases are made from precision laser cut metal which results in a solid foundation and an OEM-like fit.

    The RubiGrid® base features 4 Flex Arms which allow the base to contour to both flat or curved mounting surfaces. 

    STURDY MOUNTING ARM

    The Strong Carbon Fiber and Kevlar Arm resists bending and helps keep your device securely in place.

    Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.

    INSTALLATION & HARDWARE

    We understand no two installations are alike which is why we include 2 sets of installation hardware along with 16 different hole locations.

    Installation Method 1

    6 bolts, 6 nuts and 6 washers are included for an installation where removing a dash panel is possible. This is the most secure installation method.

    Installation Method 2

    Unable to remove the dash panel or simply don't want to go through the trouble? No problem! We include 6 self-tapping screws which allows you to secure our Universal RubiGrid® without needing access to the backside of the installation surface.


    DEVICE HOLDER CHOICES

    Depending on your needs, we offer a variety of phone holder options including spring-loaded, magnetic, MagSafe-compatible and wireless chargers.

    Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.

    Customer Reviews

    Based on 23 reviews
    87%
    (20)
    9%
    (2)
    4%
    (1)
    0%
    (0)
    0%
    (0)
    J
    John Ray
    Tacoma mount kit

    This mount is a beast, plain and simple. Over engineered and perfect. Simple install and it looks great.

    T
    Tom F
    Works well in 2006 Jeep TJ Wrangler

    I installed this in my 2006 Jeep TJ Wrangler. It has one of those aftermarket dash trays and I had to remove the little Rubigrid emblem of the front of it to get it to sit flush in the tray. No big deal, you wouldn’t have seen the emblem anyway when installed in the tray. I used a shot 4cm arm on the drivers side and a standard 7cm arm for the passengers side. I used a small section of rubber hose on each arm so I could get the arms as low as possible and not cause rattling from the arms resting on the tray. Happy with the purchase.

    C
    Chris Capps
    Quality

    As a 30 year member of management in the Automotive industry, I’m always out for what we call, “The Good Stuff”. Inside my 2016 F250 almost all day, everyday, I literally got sick and tired of keeping up with all the devices and of course, the DAILY suction cup mount and IPhone hitting the floorboard while on a conference call with THAT important client or Senior VP was always the cherry on top!
    It took me a few orders to get all the parts to my puzzle, But, Folks, this BulletPoint setup is Insane!! Without one doubt, it’s “The Good Stuff” That IPad holder has a gen3 11” Pro in it and it’s not supposed to fit, be careful but it will slide in from the side. And a sc400d dash cam sitting on a ball mount magnet. Sturdy will Never be an issue, that’s a Fact!

    I don’t impress often, but all the bases were touched on these..

    Pay attention to your application and lay out what you are looking for before you order, unlike myself…..Enjoy! 🇺🇸

    D
    David
    Great phone mount

    I was skeptical of this mount because all others I have ordered did not work very well, I was wrong. Best phone mount on the market.

    R
    Ronnie Hernandez
    Bulletpoint mount

    Excellent product!

    Product FAQs

    If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

    If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

    We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

    Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone.

    Please note that this also prevents Wireless Charging.

    The DiabloM6 is not directly compatible with MagSafe equipped iPhones.

    The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

    If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.