💥FREE SHIPPING within the US on orders of $50 or more.


    Your Cart is Empty

    RubiGrid® 2016-2023 Toyota Tacoma Dash Mount Phone + Device Holder


    (1x) RubiGrid® Base
    (2x) 2-Hole AMPS Balls
    (1x) 1cm Aluminum Mounting Arm
    (1x) Universal Phone Holder
    (1x) GoPro-Compatible Action Camera Mount
    (1x) RubiGrid® Base
    (2x) 2-Hole AMPS Balls
    (2x) 1cm Aluminum Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Base
    (1x) 2-Hole AMPS Ball
    (1x) 1cm Aluminum Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Base
    (1x) 2-Hole AMPS Ball
    (1x) 1cm Aluminum Mounting Arm
    (1x) MagSafe-Compatible Phone Holder
    (1x) RubiGrid® Base
    (1x) 2-Hole AMPS Ball
    (1x) 1cm Aluminum Mounting Arm
    (1x) MagSafe Compatible Wireless Phone Charger
    (1x) RubiGrid® Base
    (1x) 2-Hole AMPS Ball
    (1x) 1cm Aluminum Mounting Arm
    (1x) Wireless Charger with Motorized Cradle Phone Holder
    (1x) RubiGrid® Base
    (1x) 2-Hole AMPS Ball
    (1x) 1cm Aluminum Mounting Arm
    (1x) DiabloM6 Magnetic Phone Holder
    (2x) Magnetic Plates with Adhesive for phone
    (1x) RubiGrid® Base
    (1x) 2-Hole AMPS Ball

    ✅ 2016-2023 Toyota Tacoma

    Customize your Tacoma's Command Center with RubiGrid®

    If you're looking to securely mount multiple devices in your 2016-2023 Tacoma exactly where you want them, this is the dash mount solution you've been looking for.



    RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.

    Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.


    Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.

    In fact, RubiGrid® for the Tacoma can support up to 4 devices!

    Our RubiGrid® dash platform is capable of securely mounting multiple devices and is compatible with both our AMPS Mounting Balls as well as 3rd party AMPS mounts.

    Note: due to the smaller depth of this RubiGrid® base, we recommend our 2-Hole AMPS ball since the 4-Hole AMPS does not fit.


    The Strong Aluminum resists bending and helps keep your devices securely in place.


    Our RubiGrid® dash mount for the 2016-2023 Tacoma has the look and feel of a factory-installed option.


    Installation of our Tacoma RubiGrid Dash Mount is easy & straightforward.

    Simply remove your head unit's panel and drill 5 holes with the included drill bit. Securely attach the RubiGrid mount with the included hardware. Pop the panel back into place, mount your devices and that's it.

    The end result is a rock solid mounting point for your devices that you can depend on.

    Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.

    Customer Reviews

    Based on 96 reviews
    Kurt Rice
    2016 Tacoma bulletpoint mount

    First of all, this System was built very well. Second, the installation was quick and easy. The look of the system outstanding can be more pleased. The overall function of the system better than I had hope for overall grade A+ I’d recommend it to everyone . Quit thinking about getting it and just get it, It’s worth it.

    Joe Hedger

    I have bought several vent, dash, windshield, and sticky phone holders because they were less expensive than Bulletpoint. All were a waste of money. I should have just bought this. It holds the phone great!! It's solid, and it's easy to operate with one hand. Installation is a bit more expensive, but it's worth it!!!

    William Brewer
    Phone holder

    The installation was easy and my phone is more secure in my truck than ever before. I actually ordered another holder so my wife can put her phone on it when traveling together

    UC Detective
    Great Product!

    I'm an undercover detective in the Metro Atlanta area and my vehicle is not a typical vehicle outfitted by local law enforcement vehicle vendors. When I had my lights/siren, and radio installed they had no options for the mic and controls. A person on my task force told me about bullet proof solutions and I couldn't be happier.

    Very solid mount.

    I wasn't sure about this setup, but once I started mounting it in the vehicle it was very obvious I made the right decision. I have an aftermarket radio with an 11" screen, so I had to reach out around it. I selected the magnetic charger, and the CB mic holder. I later had to also get an additional ball and a 4cm arm for my charger on my phone. Everything shipped quickly and was received in good condition. A quick search for installation video and a skim on the instructions and that was it. If you need to mount anything in your vehicle then this is the brand you want to use.

    Product FAQs

    If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

    If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

    We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

    Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).

    Please note that this also prevents Wireless Charging.

    If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.

    The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

    If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.