💥FREE SHIPPING within the US on orders of $50 or more.


    Your Cart is Empty


    RubiGrid® V2 2019+ RAM Truck 1500/2500/3500/4500/5500 + TRX Dash Mount


    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Universal Phone Holder
    (1x) RubiGrid® Dash Mount
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Dash Mount
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (1x) Universal Phone Holder
    (1x) Tablet Holder
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-compatible Phone Holder
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-compatible Wireless Phone Charger
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Wireless Phone Charger with Motorized Cradle
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) DiabloM6 Magnetic Phone Holder
    (2x) Metal Plates with adhesive for phones
    (1x) RubiGrid® Dash Mount
    (1x) 4-Hole AMPS Ball

    ✅ 2019+ RAM 1500
    ✅ 2019+ RAM 2500/3500/4500/5500 with 5-inch, 8.4-inch and 12-inch screens
    ✅ 2021+ RAM TRX
    ❌ Does NOT fit 2019+ RAM 1500 Classic

    RubiGrid® 2019+ RAM Truck Phone Holder & Multi-Device Dash Mount

    Built and designed specifically for 2019+ RAM Trucks, our rock solid all-metal dash mount installs securely into the dash of your truck and provides a solid and reliable mounting point for your devices.


    What makes RubiGrid® different?


    1. Install the AMPS ball mounts on your RubiGrid®
    2. Remove the rubber pad along with the OE screws from your dash
    3. Set the RubiGrid® in place lining up with the existing holes and secure with the same OE screws

      That's it! From here, mount your equipment to create your ultimate setup. 


      Our RubiGrid® dash mount for the 2019+ RAM Truck has the look and feel of a factory-installed option. It follows the lines of the dash tray opening while still allowing access to the dash-mounted 12V outlet.

      This updated version of our RubiGrid® dash mount also includes 2 top options. The wider version is compatible with both 5" and 8.4" screens. The narrow version is compatible with the larger 12" screen.


      The RubiGrid® mount is fully expandable to use up to 3 AMPS-Style balls so you can mount up to 3 different devices along the grid platform.

      No pre-set locations. No limits.

      No sliding or slipping ball mount locations like other offerings on the market including rail systems. Each AMPS ball installs with included hardware for a reliable and secure attachment.

      Easily add, remove or change the ball mount location at any time.

      Unfamiliar with AMPS? Find out more here: AMPS Mounts Explained


      Not only is RubiGrid® base perfectly compatible with our lineup of mounts 20mm AMPS mounting balls, it's also compatible with device holders and attachments from other manufacturers. *Please verify ball size required when using parts from other manufacturers.

      Secure your Phone, Tablet, CB Radio, Handheld Radio, GoPro Action Camera, GPS, Tire Pressure Monitoring System. Whatever it is, RubiGrid® can handle it.


      Our Premium RubiGrid® Base is made from Precision, Laser Cut Metal for Extra Rigidity and an OEM-Like Fit in your 5th Generation 2019+ RAM 1500, 2500, 3500, 4500, 5500 and RAM TRX.


      Since the RubiGrid® Dash Mount installs using the OE screw holes, the result is a rock solid base.

      The Strong Carbon Fiber and Kevlar Arm resists bending and helps keep your device securely in place. Our device holder kits include 7cm mounting arms.

      Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.

      2019+ RAM Truck Fitment
      ✔︎ 2019+ RAM Truck 1500
      ✔︎ RAM Truck 2500/3500/4500/5500 with 5-inch, 8.4-inch and 12-inch Screens
      ✔︎ RAM 1500 TRX

      Does NOT fit the following vehicles:
      ✖︎ 2019+ RAM 1500 Classic (2019+ RAM 1500 Classic Phone Mounts)


      Start with our basic kit and expand as your needs change. Includes everything you need to get started.

      No need to purchase extra balls or device holders.

      Note: While our arms and device holders are interchangeable and compatible with this platform mount, RubiGrid® may not be used in combination with our dual or single ball driver or passenger side bases. Click here to see all RubiGrid®-compatible components.

      Customer Reviews

      Based on 83 reviews
      Great System

      I really like this setup. It looks like a factory install. The V2 fits perfectly in the dash and allows easy access to the lighter outlet for charging cables. My iPhone 14 Pro Max fits well in the standard phone mount. I also bought the tablet mount which fits my iPad Air nicely. If you’re worried about the quality, I can confirm that all of the components included are very sturdy and high grade. This is not your typical Amazon junk. The fit and finish is good and everything goes together easily. I have to agree with another commenter, though. My one complaint is that the two ball mounts came with different hardware, phillips and hex screws. I wish everything matched for a cleaner look. Other than that, I can’t find any faults. I’ll probably order another mount for my dash cam soon.

      Hello Larry, thank you for taking the time to write a review. We are in the process of changing all the screws to the allen head style. We apologize a few mis matches have made their way out as we transition completely. I have reached out to customer support to get you another set so they all match. Please feel free to reach out to them at any time with questions or concerns. They can be reached at support@bulletpointmountingsolutions.com

      Solid design

      Second time buyer and can't be disappointed. Solid mount and very nice design. Nothing on the market can beat this set up. Will need to buy more accessories but only way to gois Bulletmountingsolutions!

      Coby Dyck
      Great customer service!

      They forgot my mounting ball and shipped it to my as soon as I let them know awesome people!

      Good solid mount

      Love the well built mount, carbon fiber look, and options to mount more than one item to customize. I have a heavy phone with in a case that causes the carbon fiber rod to jump around alittle while driving but it's not a deal breaker for me. Also would like to see maybe an adjustment to extend the fiberglass pole in and out due to I office out of my truck alot and would like the phone closer at times. Not sure if thats an option or not. Havent looked on website to see. Great product and will purchase again in the future for my fleet of vehicles. The bottle opener for my beer is a nice touch. Can't get more American than that!


      Love this thing

      Product FAQs

      If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

      If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

      We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

      Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).

      Please note that this also prevents Wireless Charging.

      If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.

      The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

      If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.