RubiGrid® V2 2019+ RAM Truck 1500/2500/3500/4500/5500 + TRX Dash Mount with Red Arms

⭐️⭐️⭐️⭐️⭐️ – Rock-Solid Mounting System!

Really solid product! I installed the Bulletpoint mounting system in my Ram truck, and I’m very impressed with the quality. Everything feels sturdy, secure, and well-built. The installation was easy, and the phone holder stays firmly in place. It also gives the dashboard a clean, professional look. Definitely worth the money. Highly recommend!

Heavy duty! Powerful magnet and easy to install.

I want to preface this with it is worth the money I love the product I just sadly had some issues with said product ( 24 ram 1500 magsafe holder). Honestly I want to give it a higher review but I can't, I did have a couple issues upon opening and installing the system. When putting it together there was a tag left over from the mold I assume that wouldn't allow proper installation; so I had to file it down lucky I had something with me, being im not at my house (traveling for work). Then the Installation, 2 of the posts (on baseplate) had to be forced to line up which is not an easy feat given the work area but ill chalk that up to shipping and handling. The other was definitely a QC issue nothing major but was a slight inconvenience given the cost of the product. All in all love the product and would recommend to anyone looking for a system of the nature.

Trades trucks and needed to get the version that worked with my new truck. Best mount out there! I did keep some parts from my last one to add an additional mount for a passenger in my new truck.

I didn’t use mine for phones, I used for my control head for my two way radio

2024 RAM 3500 Long Horn Dually

Got my package and it has been so hot in Georgia I waited until 2 days before my camping trip to mount everything (poor planning). Unfortunately, there are not a lot of directions on how to mount and arrange everything but, thanks to the University of Youtube I got some ideas and guidance. It took me about an hour, from trial an error, to get the setup I want. I'll run this for a while and make any adjustments. I wish there was a better way to route or arrange the unsightly wires. I'll figure that out. Very pleased with the appearance.

Moved my arms and snagged a new base after trading trucks. BulletPoint are the best mounts available, used BP mount for 4+/- years in my prior truck, '18 F-150, reused arms and one ball to a new base for my '26 Ram 2500. The base was a bit snug to get into the covey, especially with 3 balls on it. The base in the F-150 had a bit more room, and I believe if this had a riser to raise the mounting plate a bit it would likely fit the Ram 2500 still but provide more mounting plate size (that is with the 12" screen setup as the other plate labeled for the smaller dash screen is larger and I would have liked to use it but raise the plate up about 1/3-1/2" to clear). That's only reason I gave 4 instead of 5 stars. My trailer TPMS is a tight fit with this setup but still rides on the plate/dash fine. Love that it still allows use of the dash power port and I was able to get a 4-port 12v plug to power the monitor, tpms, and two phones with no cords down the dash! Looked at the copy-cats out there, none were significant savings and sure didn't appear that any of them were improvements, actually looked to be more limited/non-adaptable, but being so pleased with my prior BP it would have been a hard sell for me to change. ;)

Materials and appearance are exceptional. However, alignment of base plate to top plate lacks precision. What should be a "quick" and simple install requires bending of screw posts on base plate to align with screw holes of top plate.

Fits and works perfectly. Was packaged extremely well. Should have bought it sooner.

It was very easy to install. The magnet on the phone holder is strong and it also charges my phone. It also holds my Furrion reverse cam display as advertised. All around solid products!!

I purchased the system for the Ram Trucks with the larger 12" screens. When it arrived it was the smaller screen set up with the base bracket attached to the mounting plate, and the smaller mounting plate placed inside the original box. I didn't think very much of it until I went to secure the mounting plate to the bracket. The two end holes did not line up with each other. Something that should've be extremely straight forward turned into an hour of mounting and disassembling three times. After speaking with tech support via email and sending photographs they sent out a replacement. The replacement mounting base was better fitting, but still required all the screws to be installed,by hand and some pushing and pulling with a pin punch was required before tightening.
If you purchased the large screen kit with 2 ball mounts keep this in mind, the right side of the mounting plate requires the ball mount to be positioned with the long side to be placed front to back, and NOT side to side due to the width, mounting hardware, and base mounting points. Also, if you get 2 ball mounts I suggest placing the upper right screw in place before securing the ball mount to the mounting plate, once the ball mount is in place the countersunk hole will not be fully accessible. See the photo I attached.

Overall, the product is very solid, there is no shaking of the devices while traveling, and this company stood behind their product when it wasn't right.

Quality piece of hardware that has made all the difference in my truck. I’m not an accessory kind of guy, so I was hesitant to put anything near my dash, but this looks OEM and fits perfectly.

Its a great product and very well made. Fit perfectly. Not some cheap chineese garbage either. Will be buying more products from them.

I installed the RubiGrid V2 (with black arms) in my 2026 Ram truck and I’m blown away. Installation took just a few minutes! Removed the rubber pad and OE screws, line up the metal base, and bolt it back in with the factory hardware. It fits like it came from the factory, follows the dash lines perfectly, and still leaves the 12V outlet accessible.The all-metal construction is incredibly rigid, no flex, no wobble, even on rough roads or off-road. The matte black carbon fiber arms look sharp and hold my phone (and extra devices) rock solid with zero movement. Being able to mount up to three devices on the expandable grid platform is a game-changer. Everything stays exactly where I put it.Quality is top-notch, looks OEM, and the limited lifetime warranty gives great peace of mind. Highly recommend to any Ram owner who wants a secure, professional setup!

Perfect fit. Exactly like advertised. Highly recommend this product

Smaller mounting grid with less options for mounting points but it looks good.

I’ve been extremely impressed with the dash mount for my RAM. The fit is absolutely perfect and it looks like it came straight from the factory. Installation was straightforward, and the instructions made the process simple.

The black arms are sturdy, hold my devices securely, and don’t vibrate or shift, even on rough roads. The mount keeps everything within easy reach without obstructing my view, and the overall build quality is excellent. The materials feel premium and it’s obvious that a lot of thought went into the design.

Best mounting system on the market. I’ve purchased these BPMS mounts for all of my vehicles. You just can’t beat the quality, usability and reliability of bulletpoint. Super easy to install and change your setup as you add more accessories to your rig. Forever a BPMS customer!

Look awesome! Looking to add more down the road