Your Cart is Empty
RubiGrid® 2016-2023 Toyota Tacoma Dash Mount Phone + Device Holder
$34.99 - $127.99
BMS-ToyTacomaG3RGUniGP
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(2x) 2-Hole AMPS Balls
(1x) 1cm Aluminum Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(2x) 2-Hole AMPS Balls
(1x) 1cm Aluminum Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-Compatible Action Camera Mount
(1x) RubiGrid® Base
(2x) 2-Hole AMPS Balls
(2x) 1cm Aluminum Mounting Arms
(2x) Universal Phone Holders
(2x) 2-Hole AMPS Balls
(2x) 1cm Aluminum Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) XL Universal Phone Holder
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) RubiGrid® Base
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) RubiGrid® Base
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) 2-Hole AMPS Ball
(1x) 1cm Aluminum Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
(1x) 2-Hole AMPS Ball
(1x) 2-Hole AMPS Ball
VEHICLE FITMENT
Customize your Tacoma's Command Center with RubiGrid®
If you're looking to securely mount multiple devices in your 2016-2023 Tacoma exactly where you want them, this is the dash mount solution you've been looking for.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
MORE THAN JUST A TACOMA PHONE HOLDER
Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
In fact, RubiGrid® for the Tacoma can support up to 4 devices!
Our RubiGrid® dash platform is capable of securely mounting multiple devices and is compatible with both our AMPS Mounting Balls as well as 3rd party AMPS mounts.
Note: due to the smaller depth of this RubiGrid® base, we recommend our 2-Hole AMPS ball since the 4-Hole AMPS does not fit.
STURDY MOUNTING ARM
The Strong Aluminum resists bending and helps keep your devices securely in place.
OEM-LIKE FITMENT
Our RubiGrid® dash mount for the 2016-2023 Tacoma has the look and feel of a factory-installed option.
TACOMA DASH MOUNT INSTALLATION
Installation of our Tacoma RubiGrid Dash Mount is easy & straightforward.
Simply remove your head unit's panel and drill 5 holes with the included drill bit. Securely attach the RubiGrid mount with the included hardware. Pop the panel back into place, mount your devices and that's it.
The end result is a rock solid mounting point for your devices that you can depend on.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.
R
Best Mount Ever ![User picture]()
I've had the cheap plastic suction cup mounts and some expensive mounts as well, but nothing comes close to this mount. I have nothing but love for this one. It looks great, easy mounting, multiple spots for extra mounts, just overall a great product!
J
Freakin Awesome! ![User picture]()
Great product. Great fit!
J
Fabulous Piece of Kit ![User picture]()
From the packaging to all of the components, this is top quality stuff. The only thing I had to do was add some 3M VHB tape to the mating surface to raise the level of the mount. The side benefit is that it keeps the mount in position for drilling. This tape should be included in the kit. I do wish that 25mm balls were available so you don’t have to adapt.
This thing is super strong and the finish is impeccable. They have a customer for life.
A
Perfect fit! ![User picture]()
I used these products in my work truck, so when I purchased my new personal truck, this was the only phone mount I was interested in. Seamless integration and solid mounting.
R
excellent
excellent product easy to install works perfectly
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
