Your Cart is Empty
RubiGrid® 2013-2019 Ford Police Interceptor Utility Explorer Device Dash Mount Phone Holder
$49.99 - $173.99
BMS-ExpInterceptorG1RubiGridUni
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holders
(2x) Metal plates with adhesive for phones
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holders
(2x) Metal plates with adhesive for phones
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
🚨TO PROTECT & SERVE.🚨
Built specifically for the 2013-2019 Ford Police Interceptor Utility, this dash mount solution is designed to securely mount multiple devices exactly where you want them without limitations. This is RubiGrid®.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
Whether you need to mount phones, tablets, cameras or radios, RubiGrid® can handle it.
WHAT'S GREAT ABOUT THIS DASH MOUNT?
Our Platform Dash Mount is designed to place your devices in the best position while driving.
No need to purchase mounting balls and device holders separately - our complete kits come with everything you need to securely mount your devices which gets you fully equipped and saves you money.
Comes with everything you need to get up and running.
3RD PARTY COMPATIBLE
Since RubiGrid® uses a grid platform that is AMPS-compatible, you can easily mount 3rd party accessories or devices that use an AMPS mounting plate.
Unfamiliar with AMPS? Find out more here: AMPS Mounts Explained
2013-2019 POLICE INTERCEPTOR UTILITY FITMENT & INSTALLATION
This Rock Solid Phone Mount is designed specifically for the Ford Explorer Police Interceptor with the open dash area (see images).
❓If you are unsure about fitment, please refer to our fitment image.
INSTALLATION NOTE: RubiGrid® requires the removal of the dash tray followed by drilling 2 holes to properly secure our platform to the dash. Our base takes advantage of 2 bolts already found in the dash.
P
Rubi-grid 2015 Ford P.I. utility
I was pleasantly surprised when I received this. It was very well packaged and the instructions were easy to follow. The whole set-up is well-made and heavy duty. Finally, an accessory holder that I really like!
M
When we needed a phone and tablet mounting solution for our EMS QRV, I knew there was only one stop needed! Bulletpoint has been my go to for every vehicle I use, and I recommend them to EVERYONE looking for a secure mount!
E
Great phone mount! ![User picture]()
Pretty easy to install, quality craftsmanship! I’m quite sure I’ll add another mount to the passenger side. This is the only way to mount a phone securely!
J
This thing needs lube to get your phone in! ![User picture]()
I recently purchased a base plate that came with a generic universal cell phone holder and additional holder for a passenger princess! It's made of metal and great quality, but the design on the phone holder is poorly thought out. I think you need a third hand one ti hold the arm in place, another to hold the spring loaded holder on the left side, and finally a third to open the holder. Trying to insert my phone on the attachment is a challenge without out moving the entire arm and just in general. For the price I expected better function. The thing does look awesome!
Hello Jason, thank you for taking the time to write a review. The universal holder should loosen up after a few uses. Be sure to place your phone in at an angle to expand the side arm and them place the rest of the phone in. If this continues to be too tight please reach out to customer support and they will help you with a replacement. They can be reached at support@bulletpointmountingsolutions.com at any time with questions or concerns.
W
Solid
I feel like this mount is gonna last longer than the Explorer itself.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
