0

    Your Cart is Empty

    RubiGrid® Universal Dash Mount Phone + Device Holder with 3-Ball Capacity

    BMS-3BallUniRubiGridUni

    WHAT'S INCLUDED?
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Universal Phone Holder
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (1x) Universal Phone Holder
    (1x) Tablet Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-Compatible Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-Compatible Wireless Phone Charger
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Wireless Phone Charger with Motorized Cradle
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) DiabloM6 Magnetic Phone Holder
    (2x) Magnetic Plates with Adhesive for phone
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    VEHICLE FITMENT

    ✅ Universal Fitment
    ✅ 1997-2006 Jeep Wrangler TJ
    ✅ 2004-2008 Ford F-150
    ✅ 2008-2016 Ford F-250 and F-350 Super Duty (excluding 2013-2016 Lariat, King Ranch and Platinum with pop-up storage compartment)
    ✅ 2007-2017 Ford Expedition
    ✅ 2014-2021 Toyota Tundra
    ✅ 2014-2021 RAM ProMaster


    3-Ball Universal RubiGrid® Dash Mounts

    Part of our Universal RubiGrid® lineup, this dash mount is capable of supporting up to 3 AMPS Balls.

    This RubiGrid® dash mount measures 6 & 13/16" wide by 2 & 7/16" deep by 11/16" high.

    **PATENT PENDING**

    WHAT IS RUBIGRID®?

    RubiGrid® is a fully modular dash mounting platform that uses AMPS balls, mounting arms and device holders to secure all of your devices.

    Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.


    MORE THAN A PHONE HOLDER

    Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.

    We sell AMPS Mounting Balls separately but you may also choose to secure a 3rd party AMPS-compatible mount here as well.

     

    METAL SERIES

    A rock solid mounting system starts with a rigid mounting base. Our RubiGrid® bases are made from precision laser cut metal which results in a solid foundation and an OEM-like fit.

    The RubiGrid® base features 4 Flex Arms which allow the base to contour to both flat or curved mounting surfaces. 

    STURDY MOUNTING ARM

    The Strong Carbon Fiber and Kevlar Arm resists bending and helps keep your device securely in place.

    Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.

    INSTALLATION & HARDWARE

    We understand no two installations are alike which is why we include 2 sets of installation hardware along with 16 different hole locations.

    Installation Method 1

    6 bolts, 6 nuts and 6 washers are included for an installation where removing a dash panel is possible. This is the most secure installation method.

    Installation Method 2

    Unable to remove the dash panel or simply don't want to go through the trouble? No problem! We include 6 self-tapping screws which allows you to secure our Universal RubiGrid® without needing access to the backside of the installation surface.


    DEVICE HOLDER CHOICES

    Depending on your needs, we offer a variety of phone holder options including spring-loaded, magnetic, MagSafe-compatible and wireless chargers.

    Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.

    Customer Reviews

    Based on 194 reviews
    92%
    (178)
    6%
    (11)
    1%
    (2)
    0%
    (0)
    2%
    (3)
    M
    Mark K.
    Rock Solid, Easy Install, Beautifully Machined, Amazing Utility!

    I installed the following on my 2010 Jeep Wrangler: Rubigrid Dash Mount, two Red Carbon Fiber Telescoping Mounting Arms, one MagSafe Phone Holder on the driver side and one Universal Holder on the passenger side, all of the required socket and ball connectors and I also used the Cable Management System.

    The entire system is rock solid, was easy to install (I used method 1 for the installation of the Rubigrid) and is beautifully machined. All the moving parts sync up perfectly and the cable management system is the 'Chef's Kiss'! My jeep is used both on and off road and I have never had my phone fall off of the MagSafe holder or had any issues with the Telescoping Mounting Arms. Bullet Point has done a fantastic job with designing each part to function the way it's intended to. I have experienced absolutely zero 'buyers remorse'. In fact, I plan on purchasing other accessories, such as the Aluminum Tactical MOLLE Sun Visor Panel and Headrest MOLLE Panel System. I'm officially a lifetime customer.

    Bullet Point goes the distance with their customer service. They include all the necessary tools you'll need to do the install and leave nothing to chance. All you need to provide is a drill (if you choose to use installation method #1), and the motivation to do the install. It's easy, the instructions are very clear (you can find them on the website) and fast. It took me about 45 minutes, but I'm pretty sure you could do it faster.

    What are you waiting for? Just buy it, you won't regret it for one second!

    T
    Timothy Brown
    The Best

    Great product

    G
    Garett Lefebvre
    Easy Install for my 2019 Tundra

    Super easy install using the self-tapping screws through the center dash rubber pad into the dashboard once I centered up the mounting plate. Bought the (3) position version as you never know if I'll need to add more mounts. Super rigid, holds my giant Samsung S23 Ultra no problem. Very well made.

    R
    R Tucker

    It’s a well built product with and easy to put together assembly and it’s sturdy holds my phone perfectly

    M
    Mark H.
    The Best Phone Holder

    I have been looking at these for a while and finally saw a friend who had installed one in his Jeep. Ordered it, fast shipping had it in hand within a week. I was apprehensive about the install, but as usual YouTube had a video to take the dash off my 2004 TJ. Had it installed in about 30 minutes, and it is the best phone mount ever. Wish I had found this earlier and would have saved on all those other mounts. Wish they had one specific for my 2015 F250 with the dash storage box. I'm exploring ideas where I can put their universal arm mount. If you are looking and thinking it's a bit pricey, you'll be pleased as they are super heavy duty and well made. In today's market, it's worth the price.

    Product FAQs

    If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

    If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

    We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

    Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone.

    Please note that this also prevents Wireless Charging.

    The DiabloM6 is not directly compatible with MagSafe equipped iPhones.

    The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

    If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.