Your Cart is Empty
RubiGrid® 2013-2018 RAM Truck & 2019+ RAM 1500 Classic Phone Holder Multi-Device Dash Mount
$34.99 - $157.99
BMS-RMClassicRubiGridUni
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) DiabloM6 Magnetic Phone Holder
(2x) Metal Plates with Adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) DiabloM6 Magnetic Phone Holder
(2x) Metal Plates with Adhesive for phone
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
RubiGrid® RAM Truck Phone Mount & Multi-Device Dash Platform
Built and designed specifically for the 2013-2018 RAM Truck & 2019+ RAM 1500 Classic, our rock solid dash mount installs securely into the dash of your truck and provides a solid and reliable mounting point for your devices.
**PATENT PENDING**
FITMENT
This RubiGrid® dash mount is built specifically for your 2013-2018 RAM Truck 1500, 2500, 3500, 4500, 5500 as well as the 2019+ RAM 1500 Classic pick-up for an OEM-like fit.
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS balls, mounting arms and device holders to secure all of your devices.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
MORE THAN JUST A RAM TRUCK PHONE HOLDER
Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
RubiGrid® for RAM is fully expandable to use up to 3 AMPS-Style balls so you can securely mount up to 3 different devices on the same dash mount.
We sell AMPS Mounting Balls separately but you may also choose to secure 3rd party AMPS-compatible mounts here as well.
METAL SERIES
A rock solid mounting system starts with a rigid mounting base. Our RubiGrid® bases are made from precision laser cut metal which results in a solid foundation and an OEM-like fit.
STURDY MOUNTING ARM
The Strong Carbon Fiber and Kevlar Arm resists bending and helps keep your device securely in place.
Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.
INSTALLATION
Our RubiGrid® base uses the OEM fastener locations that are already in your dash which means installation only takes a few minutes.
- Install the AMPS Ball mounts on your RubiGrid®
- Remove the rubber pad along with the OE screws from your dash
- Set the RubiGrid® in place lining up with the existing holes and secure with the same OE screws
That's it! From here, mount your equipment to create your ultimate setup.
DEVICE HOLDER CHOICES
Depending on your needs, we offer a variety of phone holder options including spring-loaded, magnetic, MagSafe-compatible and wireless chargers.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.
UNBOXING & INSTALLATION VIDEO
D
Great product ![User picture]()
![User picture]()
Very solid, does not bounce around. Easy to install, took less than 5 minutes start to finish. Solid construction, this thing has some weight to it, you can tell its going to last.
K
Nicely built
Just installed this in my pickup and so far I really like it. Hopefully it will last me the life of the pickuo
C
Best mount on the market hands down!
S
Bulletpoint RAM review
Super solid product and I am thoroughly enjoying it! The mount looks great and works even better! The assembly and install is a bit tedious, but understandably necessary. After all - that is what makes it such a solid solution. I put my phone in one handed, and it absolutely does NOT move again until and unless I want it to! Already getting lots of compliments form folks at the drive-thru's and such. I am anxious to get one set up in my Jeep as well, as soon as I figure what out stereo upgrade I am going with.
A
Vary easy instalation vary sturdy mounting
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
