Your Cart is Empty
RubiGrid® 2024+ Jeep Wrangler JL Multi-Device Platform Dash Mount Phone Holder - Driver Side
$24.99 - $93.99
BMS-JL24DRUni
WHAT'S INCLUDED?
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) Driver Side RubiGrid® Base
(2x) 4-Hole AMPS Balls
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-compatible Action Camera Mount
(2x) 4-Hole AMPS Balls
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-compatible Action Camera Mount
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Metal Plates with adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Metal Plates with adhesive for phone
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) 4-Hole AMPS Ball
(1x) 4cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
Customize your Jeep Wrangler's Command Center with RubiGrid®
If you're looking to securely mount multiple devices in your 2024+ Jeep Wrangler JL exactly where you want them, this is the dash mount solution you've been looking for.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
2024+ Jeep Wrangler & Gladiator Fitment
This driver side Jeep Phone Mount allows you to securely mount multiple devices on the dash of your vehicle. It is specifically designed for your 2024+ Jeep Wrangler JL and 2024+ Jeep Gladiator.
*Patent Pending*
MORE THAN JUST A JEEP WRANGLER PHONE HOLDER
Although this Jeep Wrangler dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
In fact, RubiGrid® for the 2024+ Wrangler/Gladiator can support up to 3 devices!
Our RubiGrid® dash platform is capable of securely mounting multiple devices and is compatible with both our AMPS Mounting Balls as well as 3rd party AMPS mounts.
FAST & EASY INSTALLATION
Our 2024+ Wrangler mounting base uses 4 threaded holes that are already found in your dash which means installation only takes a few minutes with the 4 included M5 bolts. Installation requires zero modifications or drilling.
STURDY MOUNTING ARM
The strong & lightweight carbon fiber + kevlar mounting arm resists bending and allows you to easily position your device holder exactly where you want it.
Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.
LOOKING FOR PASSENGER SIDE?
Passenger Side 2024+ Jeep Wrangler JL RubiGrid® Phone Holder Dash Mount
T
Great as always
I have lost count as to how many of theses I have purchased over the years and numerous vehicles. Just purchased a new jeep and Bulletpoint is always my go to. I have looked at other products but have always been so satisfied with my Bulletpoint I will stick with them. Can’t wait for passenger mount to be available again. Thanks for the great products
N
My 2nd one!
I purchased my 2nd phone holder because I was in an accident and my 2020 Jeep Wrangler was totaled. The old one did not fit in my new Jeep. But I honestly LOVE IT! Looks great! It took me about 15 minutes to install. Both times. And I won't buy anything else! Highly recommend!!!
J
Nice but flimsy
Seems like a decent solution to a new dash design, but the edge sticks up over the top of the bin and for OCD people that doesn’t work. Also, the phone is so shaky that you can’t even read anything while driving. I’d love to like this item, I just don’t.
D
2024 Rubicon Bulletpoint ![User picture]()
![User picture]()
Love the look and keeps center console clean! Wish it sat a bit more flush but looks great!
D
Solid mounting solution
Among my first modifications to our new 2024 Rubicon 392.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
