💥FREE SHIPPING within the US on orders of $50 or more.

    0

    Your Cart is Empty

    RubiGrid® 2023+ Ford Super Duty Dash Mount Phone + Device Holder

    BMS-FordSDG5RubiGridUni

    WHAT'S INCLUDED?
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Universal Phone Holder
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) Universal Phone Holders
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (1x) Universal Phone Holder
    (1x) Tablet Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe-Compatible Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) MagSafe Compatible Wireless Phone Charger
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) Wireless Charger with Motorized Cradle Phone Holder
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) XL Universal Phone Holder
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) XL Universal Phone Holders
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    (1x) 7cm Carbon Fiber + Kevlar Mounting Arm
    (1x) DiabloM6 Magnetic Phone Holder
    (2x) Magnetic Plates with Adhesive for phone
    (1x) RubiGrid® Base
    (2x) 4-Hole AMPS Balls
    (2x) 7cm Carbon Fiber + Kevlar Mounting Arms
    (2x) DiabloM6 Magnetic Phone Holders
    (4x) Magnetic Plates with Adhesive for phone
    (1x) RubiGrid® Base
    (1x) 4-Hole AMPS Ball
    VEHICLE FITMENT

    ✅ 2023+ Ford Super Duty (all trim levels with 8" or 12" screen)

    Create the Ultimate Ford Super Duty Command Center with RubiGrid®.

    If you're looking to securely mount multiple devices in your 2023+ Super Duty exactly where you want them without limitations, this is the system you're looking for.

    **PATENT PENDING**

    WHAT IS RUBIGRID®?

    RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.

    Built specifically for the 2023+ Ford Super Duty (equipped with both 8 inch and 12 inch screens), mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.

    Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.

    INSTALLATION

        Requires removal of rubber dash mat (not reused) along with removal of plastic dash tray. In order to properly secure our platform to your vehicle's dash, installation requires drilling 5 small holes and the use of 2 self-tapping screws in the plastic dash tray.

        From there, secure the AMPS ball anywhere along the RubiGrid® platform followed by attaching the mounting arm and device holder to create your customized command center.

        All necessary hardware is included with the exception of a drill.

        LIMITED LIFETIME WARRANTY

        Our RubiGrid® Super Duty dash mount is backed by our industry-leading Limited Lifetime Warranty and we stand behind our products 100%.

        Customer Reviews

        Based on 72 reviews
        88%
        (63)
        10%
        (7)
        1%
        (1)
        0%
        (0)
        1%
        (1)
        C
        Chris Wolfe
        Works great

        I like this mount because it looks built in from the factory. It works great. The only suggestion I would say is make the screws a little longer so you have the option of installing over the rubber mat in the tray instead of taking it out completely. I was able to make a couple cuts in the rubber mat to make mine work

        J
        Joe
        Busting your new dash.

        Watching videos, I knew going into this installation id bust some clips in my dash. However, as a seasoned tech of over 30 years, i figured i could do it with minimal breakage. Nope, broke most even finessing. The drivers corner does not bolt or connect to anything, It bolts firm to the base they want you to bolt it to, but ford doesn't have a clip in this location, so the drivers side corner closest to you, will flop a little. The mount is great, the mounting process is less then perfect. I was a little disappointed in that. The overall install was easy. But there mounting to dash isn't the best. Ive considered ordering the piece that I broke from ford and going back in and installing a new piece, mostly because im anal! you may want to consider that. However, the piece that broke, is not why it is loose on the drivers corner. Ford just doesn't have a clip there to secure the plastic that the mount bolts to.

        D
        Dale Eaves
        Easy Install

        Installed in about an hour.

        M
        Mike D
        I like it so much I bought another

        Well made and does what it should.. I bought one for my bronco and after a couple weeks I bought another for my truck. Very nice

        G
        Greg Rodgers
        New Truck New mount

        Previously I had installed the Bulletpoint mounting system on my 2016 Ford F150 to mount my RV rear camera monitor, TPMS monitor and iPhone....
        It worked so well I ordered the new RUBIGRID mounting base to install in my new 2024 Ford F250 Super Duty.....all of my previously bought items transferred seamlessly
        Great product!!

        Product FAQs

        If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.

        If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.

        We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help

        Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).

        Please note that this also prevents Wireless Charging.

        If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.

        The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.

        If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.