Your Cart is Empty
RubiGrid® 2024+ Ford F-150 & Raptor Phone Holder Multi-Device Dash Mount - Narrow Dash with 14 Speaker System
$54.99 - $179.99
BMS-F150G14SlimRubiGridUni
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 10cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 10cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 10cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 10cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 10cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 10cm Carbon Fiber + Kevlar Mounting Arms
(2x) XL Universal Phone Holders
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(4x) Metal Plates with Adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(4x) Metal Plates with Adhesive for phone
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe Compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 10cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Charger with Motorized Cradle Phone Holder
(1x) RubiGrid® Base (1x) 4-Hole AMPS Ball
VEHICLE FITMENT
Customize your F-150's Command Center with RubiGrid®.
If you're looking to securely mount multiple devices exactly where you want them without limitations, this is it.
**PATENT PENDING**
IMPORTANT 2024 FITMENT: Ford offered 2 different styles of dash trays depending on your Model and Equipment Group. This mount is compatible with trucks equipped with the 14 speaker sound system. Please refer to the compatibility drop down menu to make sure your vehicle is compatible with this RubiGrid® dash mount.
If your 2024-2025 is not listed as a compatible vehicle, you will need the wider version seen here: RubiGrid® Ford F-150 Dash Mount
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
MORE THAN JUST AN F-150 PHONE MOUNT
Although this F-150 dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
In fact, RubiGrid® for the 2024+ F-150 can securely mount multiple devices!
OEM-LIKE FITMENT & EASY INSTALLATION
Our RubiGrid® dash mount for the 2024+ F-150 & F-150 Raptor has the look and feel of a factory-installed option following the lines of the dash tray opening.
Installation is as simple as setting the dash mount into place and securing it with self-tapping screws.The end result is a rock solid mounting point for your devices that you can depend on.
All necessary hardware is included.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder. We recommend using 4-Hole AMPS balls and 10cm mounting arms.
D
Just put it in looks great
K
2024 Raptor ![User picture]()
Looks ok but there are gaps between the dash and the mounting base. You would think that it would sit against the plastic without space between. I will find some sort of materiel to use as a spacer. I didn’t notice until after I drilled the bottom. No way to eliminate that gap moving forward and aft. Sucks but it’s too late now.
R
Easy install
Product is well made, installation was easy, preforms like I was hoping to reduce clutter from phone and 2way laying in cup holder. I highly recommend
B
Solid
D
Just installed and it looks great
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
