0

    Your Cart is Empty

    Grab Bar Insert Replacement with 2 Mounting Points 2011-2018 Jeep Wrangler JK - Orange

    BMS-JKGrabHandleOrange

    WHAT'S INCLUDED?
    (1x) Orange Grab Bar Insert Replacement
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) Universal Phone Holder Stubby Edition with 20mm Connector End (Stubby Edition)
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) XL Universal Phone Holder Stubby Edition with 20mm Connector End (Stubby Edition)
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) Diablom6 Magnetic Phone Holder Stubby Edition with 20mm Connector End (Stubby Edition)
    (2x) Metal Plates with adhesive for phone
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) MagSafe Phone Holder Stubby Edition with 20mm Connector End (Stubby Edition)
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) Handheld Radio Holder Stubby Edition with 20mm Connector End (Stubby Edition)
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) CB Radio Holder Stubby Edition with 20mm Connector End (Stubby Edition)
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) MagSafe-compatible Wireless Phone Charger with 20mm Ball
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    (1x) Orange Grab Bar Insert Replacement
    (1x) Wireless Phone Charger with Motorized Cradle with 20mm Ball
    (2x) 20mm Connector Ends
    (2x) 20mm Ball Mounts
    (2x) 1" Ball Mounts
    (2x) Blank Caps
    (1x) Installation Hardware Set with Tools
    VEHICLE FITMENT

    ✅ 2011-2018 Jeep Wrangler JK
    ❌ 2007-2010 Jeep Wrangler JK

    Looking to securely mount 2 additional devices in your 2011-2018 Jeep Wrangler JK? This Orange Metal Grab Bar Insert Replacement is the ultimate solution!

    THE PROBLEM

    Up until now, there hasn't been a reliable or rock solid solution to mount devices to the Wrangler JK's grab bar since the original bolts found on the JK's grab bar are purely cosmetic.

    THE SOLUTION

    This is a Complete Insert Replacement Grab Bar Solution which provides rock solid attachment points to securely mount up to 2 devices in your Jeep.

    Whether you want to mount a CB mic, Handheld Radio, tablet or phone, our Metal Grab Bar Replacement gives you the ability to mount any of these devices.

    Plus, our solution is affordable and has incredible value when compared to some of the full replacements on the market which can cost as much as a new off-road tire. No thanks!

    **PATENT PENDING**

      8 ATTACHMENT OPTIONS INCLUDED

      You read that right! All Grab Bar Insert Replacements include 4 different attachment options (2 of each). You can install any combination of 2 since there are 2 mounting points on the Grab Bar Replacement.

      (2x) 20mm Connector Ends: these aluminum mounting attachments are compatible with any of our standard device holders with an integrated 20mm ball (to be used with the two wireless phone charger configurations).

      (2x) 20mm Ball Mounts: these aluminum mounting balls are compatible with any of the  standard Bulletpoint mounting arms or any of the Bulletpoint Nubby Edition device holders (Nubby Edition holders are used when selecting a device holder configuration in the dropdown menu excluding our two wireless phone charger configurations).


      (2x) 1" Ball Mounts: these aluminum mounting balls are designed to be used with 3rd party device holders which use a 1-inch (B Size) mounting system including RAM® Mounts.


      (2x) Blank Caps: these aluminum caps are used if no device holder is required.

        Note: device holders are not included with the "Grab Bar Insert only" option.

        EASY INSTALLATION

        Installation couldn't be easier and requires zero modifications to your vehicle.

        1. Remove the original plastic grab bar insert with the included trim removal tool along with removing the 2 bolts found underneath the grab bar
        2. Set the Bulletpoint Metal Grab Bar Insert Replacement in place
        3. Reattach the grab bar using the supplied replacement bolts (note: these replacement bolts are double threaded and will appear different than the threads found on the original bolts but they will in fact work!)
        4. Select and install 2 attachment points to the grab bar (4 different options are included depending on your needs - 2 of each)
        5. Attach your desired device holders (sold separately) to the attachment points

        THE PERFECT COMPLEMENT TO RUBIGRID®

        For the ultimate Jeep Command Center, combine this Grab Bar Mount with our RubiGrid® Jeep Phone Holder Dash Mount or any of our other 2011-2018 Jeep Wrangler JK Dash Mounts.

        Safety Warning & Installation Notes: For off-road use only. Do not block airbags.

        Do not overload your grab bar with excessive weight or excessive length via the addition of a mounting arm. Excessive length of your overall arm and total load must be considered when using this product. We recommend the use of our Nubby Edition device holders. If you wish to use a mounting arm, shorter arms such as our Micro and Mini are recommended. Please email customer support if you have questions about this product.

        Customer Reviews

        Based on 148 reviews
        96%
        (142)
        3%
        (4)
        1%
        (1)
        0%
        (0)
        1%
        (1)
        T
        Tim Lee
        Excellent upgrade!

        This has been a great upgrade for my 2014 Jeep JK. The old plastic grab bar insert was easy to remove and it was a definite upgrade to put in the metal grab bar replacement. The 20 MM ball mount is very easy to use.

        G
        Greg Miller

        Super easy install and worked exceptionally well

        D
        David
        Cell phone holder.

        One of the best upgrades I have made to the Jeep. I ordered Ram mounts phone holder. X Grip universal mounts and they fit perfectly.

        J
        Joseph Polidore
        Perfect fit

        I had bolted a phone mount into my passenger grab bar. It recently broke from the weight. This bar fit perfectly and accomplished what I tried to do, with ease.

        D
        Dan Smart
        As described

        Everything thing fit perfectly. Comes with everything you need to do the job. Awesome quality.

        Product FAQs