Magnetic Dash Camera Adapter with 20mm Ball Mount

I was trying to figure out how to mount my Rove dash cam on the grid, then I saw that someone else posted a review about how they stuck the mag mount to the front of the camera but they didn't show a real good picture. I am including a picture of how I mounted mine. The primer and adhesive tape worked great. This can get really hot in the sun and so far I have not had any issues with the adhesive. Thank you to John K. for the great idea!

I have been very pleased with my rail, mag safe charging mount & mic holder. I have just added the dash cam holder & so far, so good. I’ll know more about that tomorrow. I’m leaving on a work trip, and I will see how well that sticky pad stays on, while driving 600 miles.

I have included a picture of my setup. I have the 2 ball mount with a 7 cm arm and mag safe mount for the phone and a 4 cm arm on the dash cam mount. I hate suction cup mounts and found the 4 cm puts the camera at the perfect height. Can't say enough about Bullet point mounting solutions , keep up the great solutions.

Stop. Don't buy another windshield mount, or cheap adhesive mount. Bullet point mounting solutions are hands down, the. Best. Mounting solutions available. Period. Stop looking and comparing and buy the best. Customer service is a bar ahead of any competition. But you really won't need customer service because the product is just that good .

Absolutely Awesome Product can’t seem to stop buying all kinds of attachments, used the GoPro mount as radar mount liked the look better Works Great!

As always, these mounts are solid. My Rove R2 was not flat enough on the bottom to use with this mount. I attached the mount on the front of the dash cam and it works well and does not interfere with the camera.

I love this product. I have it holding my Garmin Dashcam live. I have been searching for a product like this for a while, and I am happy that I found it! I didn't want my dash cam mounted to my window, but this holds it in place and doesn't slip. I have this in my Jeep Wrangler JL.

Note: this doesn't come with the part circled in red. If you don't have the mounting already, you must order one to hold the mount.

The 3M adhesion promoter was dried out in its packet, but I was impatient and mounted the disk with 3M double sided tape to the camera, anyway. So far so good. I went ahead and ordered some adhesion promoter to have handy. There was an extra piece of double sided tape included just in case. An extra packet of adhesion promoter would have been a big plus. The magnet on the disc is very strong, so the weak point, if any, will be the tape. Love the set up so far!

Great concept but the adhesive does not hold under heat conditions. Works OK when it's cool but close the windows and lock up the car and you'll return to your camera hanging from the power cord because the internal heat of the interior turns the adhesive to goo!

I used it to mount my Rove dashcam to the Rubigrid in my 2008 F450. Seems very sturdy but I added a clamp just to be extra sure. Just like all of Bulletpoints stuff it's very well made!

So glad I found this because I really wanted to add my dashcam to the picatinny rail but didn't know how I was going to do it until I found this hidden in the shop. The adhesive is super strong and so is the magnet.

Great product and work amazing.

I wanted to love this… the adhesive to hold the camera doesn’t hold up. I ended up buying a clamp off of Amazon to hold my camera to the mount - which actually worked great! Bulletpoint really needs to make something like that available with this item because it simply doesn’t work otherwise.

Got this hoping to get a dash cam for it but can't find any that use the ball mount. Solid arm though

A nice quick mount adapter for lighter gear. All aluminum and the magnet has decent hold power for it's size, but it really isn't up to holding much weight if that weight is offset at all or not directly vertical. It doesn't take much torque from a bump to knock heavier stuff off of it otherwise. No stars removed for that, as it was expected and there is only so much hold a magnet can provide in a junction this small.

The bigger issue for me is getting the teeth to line up properly when remounting my device. I end up fumbling around with it like trying to blindly plug into an electrical socket behind a couch. It sets in firmly once it's right, but it also seems to fight doing that with the magnet constantly pulling it into an offset position as well as the proper one. There is no easy way to automatically line the teeth up properly. A locating pin/bump and sawtooth teeth would likely work much better in that regard.

The adhesive that comes with this lasted less than a day in the Vegas heat.

Work great on my dash cam and TPS unit!

I recently purchased the Magnetic Dash Camera Adapter with 20mm Ball Mount first my FJ Cruiser after becoming frustrated with attaching it to my windshield. The BulletPoint mounting hardware was the perfect solution.

Wanted to mount my dash camera on my dash mount but was too low for my liking, worked as designed easy to install and mount is still on camera in this Texas heat holding stron just didnt like the view from dash vs top of window

Well i ordered what I thought I jneeded , but what I got was just the part to hook to my camera, but no way to conne t it to my dash BulletPoint component.
The phone mounts worked great.
The only thing I could suggest would be if you see an error, could you contact purchaser and advise them of the error suggest that I needed to order an other part for it to work correctly.

I used this for my dash cam and it work perfectly. Great adjustability to get just the right fields of view for the camera.

My dash cam was round not flat. The adhesive didn’t show ick well. Need to make plate for round dash cams.

Another great product from bulletproof. Options are only limited by your imagination

Holds my Rexing 4 dash cam securely. Magnetic holder is easy to remove unit and use in my other vehicle.

Great product!

Very pleased with the dash cam mount. I had mounted the major structure from Bulletpoint on my Silverado for my police scanner. Have added the dash cam to the other side. Needed an additional bracket so I got a perfect fit. i really like this product.

Absolutely fantastic, I really love your products, thanks so much