AMPS-Compatible Low Profile Universal Device Mount with Interlocking Fastener System

I was looking for mounts and this was the best for my radar. I bought the rubigrid and the mount for my Toyota and it made things look clean on the dash. I’m going to see on more accessories for my dash.

I know a radar detector isn't much these days, but I've never driven without one. This mount was so clean and simple! Wiring was even better since I could drop it behind the radio.

Attached easily and holds my cobra radar detector in place firmly.

Radar Detector mount that kept the detector flat on the dash, on the drivers side BulletPoint mount I screwed it to 2 of the holes after taking the 20mm ball off, had to buy 2 screws 1/4 of an inch longer and that worked out great and the detector sits great. BulletPoint products are great for my new 2025 Jeep Gladiator.

So this works great. It screws on using the included hardware and the Velcro styled secure pads are also good. I did notice depending sometimes what I have mounted on it can wobble so it’s not most secure for heavier items however for a little weighted object this is fantastic.

I purchased 2 of the these Amp radar detector mounts and put them together with longer bolts secured to the base. With the Ram you need a thicker block than just one to clear the depth of the space. Perfect height now and looks great.

Was dealing with double sided industrial strength Velcro straps to hold my radar down but would constantly move or the glue would heat up with the heat and shift the radar sideways.
This has securely held my radar in place and looks like a factory spot for it.

I was looking for a solution to reinstall my Passport Radar Detector in my new 2024 Toyota Tundra that did not involve using suction cups that inevitably fail. Since I already installed Bulletpoint’s Rubigrid to attach my iPhone in the truck, I was very pleased to discover they had several options available. Since the Tundra’s windshield is a bit small top to bottom, I didn’t want something that would locate my Passport in a position that would block my view. Bulletpoint’s new low profile mount is exactly what I was looking for!!! The mount is bolted to the Rubigrid and uses Velcro (included in the kit) that is applied to the bottom of the radar detector. I cleaned the bottom of the detector with some isopropyl alcohol, let it dry, and then applied the industrial Velcro to the detector. I let it sit for a few hours and then installed it. What a clean and uncluttered installation! If that wasn’t satisfying enough, I love the fact I can put up my sunshade without taking down the detector 🙌🏼. In those instances when I do need to remove the detector for security reasons, the Velcro mount allows you to do that easily. Having an uncluttered windshield is important to me and Bulletpoint delivers in spades!!! Even my wife loves how well the Bulletpoint Rubigrid system integrated with our new truck……I couldn’t ask for more!

This was perfect for mounting my detector. Low profile that blends in with the dashcam and phone mounts. I had it mounted on my mirror stalk before and it advertised itself a little more than I preferred plus it made putting the sunshade in place a hassle. This mount solved all of that.

great product. I highly recommend.

Excellent product

I used this for my Escort radar detector. It allows me to remove it quickly or adjust it right to left for a perfect mounting. Love this product.

I was looking for a mount for a compass to put in my FourRunner. This was suggested to me and it has exceeded my expectations. It is easy to install. The compass does not move. You get an additional pad to use when the first one wears out or you want to mount another device. This mount is well worth the money.

I wish the built proof original mount was about 2” taller forr over all height. I the raider mount is great but I had to get creative to build it taller because if the 12-14” screen. The rader detector wouldn’t sit flush across. I improvised and added more velcros pieces to the height I wanted. Overall 5 stars but could use some tweaking

Exactly satisfied with my order. Highly recommend them.

Perfect for radar

Thank you! This contraption works great. It gives my passenger a phone mount, a perfect mount for the radar detector, and a platform for my solar powered dancing hula girl from Maui.

I have a 2021 Jeep Rubicon in 2020 F250 and I have these phone holders in both vehicles. By far the best parts I've ever purchased as far as phone holders

Awesome for my radar detector so easy and low profile. Rock solid. Jeep wrangler jl 2024

Works as indicated and helped me neatly and with a very low profile mount my radar detector on the Rubigrid Dash Mount for my truck! Highly recommend this mount!

Good quality id definitely recommend

I was unsure about adding this to my order. I ended up really impressed with the strength of the adhesive and interlocking "Velcro" like material!!! Thanks for the great products!!!!!

The 2019+ Ram 1500 Rubigrid sits recessed in the mounting position. With this configuration, the AMPS-compatible mount sits 1/8" to 1/4" too low for a radar detector. There needs to be a spacer plate and longer attachment screws, or some sort of riser included for these Ram Rubigrids.
I also have the raised radar detector mount, but do not really care for it as the small, round interlocking fastener surface is too small and allows the radar detector to move/come loose when pushing the buttons on the top of the radar detector.

It's a good product but you will need to have two of them piggybacked in order for it to work on a ram 1500 as it is a deeper well. That means finding longer screws.