Your Cart is Empty
RubiGrid® Universal Dash Mount Phone + Device Holder with 3-Ball Capacity
$42.99 - $152.49
BMS-3BallUniRubiGridXLUni
WHAT'S INCLUDED?
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(2x) Universal Phone Holders
(1x) RubiGrid® Base
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(2x) 4-Hole AMPS Balls
(2x) 7cm Carbon Fiber + Kevlar Mounting Arms
(1x) Universal Phone Holder
(1x) Tablet Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Phone Holder
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-Compatible Wireless Phone Charger
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Magnetic Plates with Adhesive for phone
(1x) RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
3-Ball Universal RubiGrid® Dash Mounts
Part of our Universal RubiGrid® lineup, this dash mount is capable of supporting up to 3 AMPS Balls.
This RubiGrid® dash mount measures 6 & 13/16" wide by 2 & 7/16" deep by 11/16" high.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS balls, mounting arms and device holders to secure all of your devices.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
MORE THAN A PHONE HOLDER
Although this dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
We sell AMPS Mounting Balls separately but you may also choose to secure a 3rd party AMPS-compatible mount here as well.
METAL SERIES
A rock solid mounting system starts with a rigid mounting base. Our RubiGrid® bases are made from precision laser cut metal which results in a solid foundation and an OEM-like fit.
The RubiGrid® base features 4 Flex Arms which allow the base to contour to both flat or curved mounting surfaces.
STURDY MOUNTING ARM
The Strong Carbon Fiber and Kevlar Arm resists bending and helps keep your device securely in place.
Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.
INSTALLATION & HARDWARE
We understand no two installations are alike which is why we include 2 sets of installation hardware along with 16 different hole locations.
Installation Method 1
6 bolts, 6 nuts and 6 washers are included for an installation where removing a dash panel is possible. This is the most secure installation method.
Installation Method 2
Unable to remove the dash panel or simply don't want to go through the trouble? No problem! We include 6 self-tapping screws which allows you to secure our Universal RubiGrid® without needing access to the backside of the installation surface.
DEVICE HOLDER CHOICES
Depending on your needs, we offer a variety of phone holder options including spring-loaded, magnetic, MagSafe-compatible and wireless chargers.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.
R
AWESOME ![User picture]()
![User picture]()
Best mounts I have ever had
D
The last phone mount ever
Will never have to purchase another mount again...Ever....indestructible and looks awesome to. WOW.
P
Sturdy, compact and reliable. ![User picture]()
![User picture]()
Very impressed with the overall quality of my mount. I chose the most sturdy, mounting method and have been really impressed. Once tightened down, it doesn’t move and you are not having to constantly tighten or move it back. Of course I was hesitant because they are more pricey than competitors, but I will tell you it is worth the money!
A
2008 Jeep JK ![User picture]()
![User picture]()
![User picture]()
![User picture]()
This is my second Bulletpoint purchase. First was my 19 Superduty, and loved it. For my JK I used the Rubigrid system, T Tab adapter ( I had to file it down to size to fit my dash cam), 12 V power supply, single 20mm ball, along with an aftermarket center dash panel. It all worked out great! Went back and used some oversized washers under the dash panel for added stability because it wasn’t as rigid as the OEM panel.
A
Perfect for Tundra ![User picture]()
![User picture]()
![User picture]()
![User picture]()
Cut exactly around rubber mat so base would sit flat on hard plastic. Used enclosed hardware to securely fasten it. Very sturdy.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone.
Please note that this also prevents Wireless Charging.
The DiabloM6 is not directly compatible with MagSafe equipped iPhones.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
