Your Cart is Empty
New
RubiGrid® 2024+ Jeep Wrangler JL Multi-Device Platform Dash Mount Phone Holder - Driver Side
$39.99 - $108.99
BMS-JL24DRUni
WHAT'S INCLUDED?
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) Driver Side RubiGrid® Base
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-compatible Action Camera Mount
(2x) 4-Hole AMPS Balls
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Universal Phone Holder
(1x) GoPro-compatible Action Camera Mount
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) XL Universal Phone Holder
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Phone Holder
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Metal Plates with adhesive for phone
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) DiabloM6 Magnetic Phone Holder
(2x) Metal Plates with adhesive for phone
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) MagSafe-compatible Wireless Phone Charger
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) 4-Hole AMPS Ball
(1x) 7cm Carbon Fiber + Kevlar Mounting Arm
(1x) Wireless Phone Charger with Motorized Cradle
(1x) Driver Side RubiGrid® Base
(1x) 4-Hole AMPS Ball
(1x) 4-Hole AMPS Ball
VEHICLE FITMENT
Customize your Jeep Wrangler's Command Center with RubiGrid®
If you're looking to securely mount multiple devices in your 2024+ Jeep Wrangler JL exactly where you want them, this is the dash mount solution you've been looking for.
**PATENT PENDING**
WHAT IS RUBIGRID®?
RubiGrid® is a fully modular dash mounting platform that uses AMPS mounting balls.
Mount multiple devices and easily change the configuration and location of your mounting balls to dial in your perfect setup.
2024+ Jeep Wrangler Fitment
This driver side Jeep Phone Mount allows you to securely mount multiple devices on the dash of your vehicle. It is specifically designed for your 2024+ Jeep Wrangler JL.
*Patent Pending*
MORE THAN JUST A JEEP WRANGLER PHONE HOLDER
Although this Jeep Wrangler dash mount is designed to hold your phone, it can do much more than that. Whether you need to mount phones, tablets, action cameras or radios, RubiGrid® can handle it.
In fact, RubiGrid® for the 2024+ Wrangler can support up to 3 devices!
Our RubiGrid® dash platform is capable of securely mounting multiple devices and is compatible with both our AMPS Mounting Balls as well as 3rd party AMPS mounts.
FAST & EASY INSTALLATION
Our 2024+ Wrangler mounting base uses 4 threaded holes that are already found in your dash which means installation only takes a few minutes with the 4 included M5 bolts. Installation requires zero modifications or drilling.
STURDY MOUNTING ARM
The strong & lightweight carbon fiber + kevlar mounting arm resists bending and allows you to easily position your device holder exactly where you want it.
Note: due to the presence of kevlar, the mounting arm has a subtle blue hue in direct light.
Note: If you wish to add additional device holders, you must have an AMPS ball for every additional device holder.
LOOKING FOR PASSENGER SIDE?
Passenger Side 2024+ Jeep Wrangler JL RubiGrid® Phone Holder Dash Mount
Customer Reviews
Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Great product as usually, but….
Super good quality, this is my second mount I’ve bought for different vehicles. My only concern for this ‘24 Rubigrid mount is the arm is about 1” too long. It’s hard to position the phone away from the steering wheel without blocking the gauges or the infotainment screen.
R
Great product, holds well. Consider shorter arm. ![User picture]()
![User picture]()
Love the product, but I had to extend my steering wheel all the way out to avoid contact with the phone. I need to see about swapping for the shorter one as the standard is a little long in my opinion. I had to mount as far right as possible and angle back to make it fit better.
Looks good, solid and secure. Some tweaking but could definitely be my favorite add to my Jeep yet.
M
Solid!!
Returning customer for another great product. Easy to install and so sturdy.
J
Super Solid
Very easy to install, following the clear and concise instructions. This thing is super solid. No matter what bumps I'm hitting in the Jeep, it stays rock solid and the phone never moves. I have a pixel 6 pro and it clamps in there very tightly, but it's easy to remove.
Limited Lifetime Warranty
Our Warranty
This product is backed by our industry-leading Limited Lifetime Warranty. Read more about it by clicking the button below.
Product FAQs
-
If purchasing any of our pre-built configurations (except for Base only), you will receive everything you need to securely mount your devices.
If you opt for the base only configuration or wish to add additional devices to the RubiGrid® base, you will need 1 AMPS ball, 1 mounting arm and 1 device holder. The exception is the action camera mount where a mounting arm is not necessary.
-
We have a page dedicating to helping you choose the best phone holder depending on your usage and your phone size: Phone Holder Help
-
Our DiabloM6 magnetic phone mount requires a thin metal plate affixed to the back of your phone (even on MagSafe-equipped iPhones).
Please note that this also prevents Wireless Charging.
If you require wireless charging, we offer 2 wireless charging options: our MagSafe-compatible Wireless Charger or our Wireless Phone Charger with Motorized Cradle.
-
The metal plate features adhesive on the back and must be attached to your phone or case. It may not stick to all phone cases. For example, many silicone cases have non-stick properties that may not work with the metal plate.
If you have a MagSafe-compatible phone and you do not want to apply the metal plate or you wish to maintain wireless charging functionality, we offer a MagSafe-compatible phone holder.
Compatible Add-Ons & Accessories
Customize your RubiGrid® Command Center with these compatible accessories and device holders.
